Product Introduction
Steel edge rubber water stop (also known as: steel edge water stop) is a rubber water stop with a non-uniform thickness structure. The steel edge water stop is divided into a strong area and a waterproof area. Additional installation holes are added to the steel plate of the water stop and connected to the rebar, which makes it difficult to displace after being fixed, ensuring that the stress on each part is uniform and reasonable. It has characteristics such as high strength, good elasticity, easy fixation (can be welded to the rebar for fixation), and strong bonding with concrete. However, it has a small elongation rate and poor resistance to bending deformation, making it unsuitable for areas with frequent changes in joint width.
Construction Precautions
After the steel edge water stop is transported to the construction site, it should not be exposed to the sun for a long time to prevent rain exposure. It should not come into contact with strongly polluting chemical substances to avoid rubber aging.
During transportation and construction, prevent damage to machinery and rebar.
During the installation process of the rubber water stop, the water stop must be securely fixed to avoid displacement during concrete pouring, ensuring the correct position of the water stop in the concrete.
Methods for fixing the water stop include: using additional rebar for fixation, special clamps for fixation, and lead wire and formwork fixation. If perforation is required, it can only be selected in the installation area at the edge of the water stop, and other areas must not be damaged.
Tag:
Steel edge water stop
Contact Us
Classification
Related Products
Rubber water stop is made using the high elasticity and good compressive deformation of rubber, as well as its high tear strength and tensile strength, to produce elastic deformation under various loads without tearing or breaking, thus serving the purpose of securing seals, preventing seepage, and preventing leaks.
Product-type water-absorbent swelling rubber is widely used in deformation joints, construction joints, waterproof sealing of penetrating pipelines in civil engineering structures, joints of reinforced concrete in shield tunneling, waterproof sealing gaskets, interface materials for pipe jacking projects, sealing of interface for underground pipelines in open-cut box culverts, and waterproof sealing in hydraulic and hydropower, waterway civil engineering, etc.
Rubber water stop is made using the high elasticity and good compressive deformation of rubber, as well as its high tear strength and tensile strength, to produce elastic deformation under various loads without tearing or breaking, thus serving the purpose of securing seals, preventing seepage, and preventing leaks.
The main performance indicators of the water-swelling water stop strip produced by our company have been tested and qualified by the National Building Materials Testing Center and the Beijing Building Materials Science Research and Testing Institute, and have reached the performance of similar foreign products. This product is a chemical building waterproof material made from more than a dozen materials, including high-grade water-absorbing materials and rubber, mainly aimed at solving the problem of water leakage in construction joints of underground concrete.
Power by 300.cn | Label | List of cities