Water stop belt.
Key words:
The steel edge rubber water stop (also known as: steel edge water stop) is a rubber water stop with a non-uniform thickness structure in its cross-section. The steel edge water stop is divided into a strong area and a waterproof area. Installation holes are added to the steel plate of the water stop and connected to the rebar, making it difficult to displace after being fixed, ensuring that the stress on each part is uniform and reasonable. It has characteristics such as high strength, good elasticity, easy fixation (can be welded to the rebar for fixation), and strong bonding with concrete. However, it has a small elongation rate and poor resistance to bending deformation, making it unsuitable for areas with frequent changes in joint width.
Key words:
The steel edge rubber water stop (also known as: steel edge water stop) is a rubber water stop with a non-uniform thickness structure in its cross-section. The steel edge water stop is divided into a strong area and a waterproof area. Installation holes are added to the steel plate of the water stop and connected to the rebar, making it difficult to displace after being fixed, ensuring that the stress on each part is uniform and reasonable. It has characteristics such as high strength, good elasticity, easy fixation (can be welded to the rebar for fixation), and strong bonding with concrete. However, it has a small elongation rate and poor resistance to bending deformation, making it unsuitable for areas with frequent changes in joint width.
Key words:
The back-adhesive rubber water stop is a water-stopping structure set on the outside of the concrete deformation joints and settlement joints of underground structures (water-facing surface).
Key words:
Good wear resistance and aging resistance: It can maintain stable performance even after long-term use.
Key words:
Latest Products
Power by 300.cn | Label | List of cities